355 120

#355120




Price $5.48
Each

Product Description

MATERIALS AND FUNCTION
Housings - The plastic housing holding the metallic screws and clamps is made of UL 94 V2 (105 degree C) thermoplastic polyamide 6.6. This plastic and its certification allow operation rated at 600 V, providing ample dielectric strength for any Industrial Application.

Clamps - Steel is one of the strongest materials available for its value. The clamps are zinc plated to guard against corrosion. When properly torqued, the clamp is designed to self-lock.

Screws - Made of steel as well, the screws act as a system with the clamps - this system requires the same materials for each component. The screws lift and help to self-lock the clamps providing a downward force onto the conductors. The screws are also plated with a Zinc finish to prevent any form of corrosion.

CONNECTION TYPES
Screw Connection
This is the most popular of all known connection methods. Screw connection refers to any connection in which the conductor is stripped of its insulation and clamped without any preparation.

When the screw is tightened, the pressure pulls apart both halves of the clamping yoke. This generates a high locking action on the screw and provides excellent vibration resistance.

Tension Clamp System
Tension clamp connection allows the conductor to be pressed directly against the current bar. The clamp is opened with a screwdriver allowing the insertion of the conductor.

The YBK Series for fuse blocks utilize spring clamp technology and fusing for 5 x 20 mm, 5 x 25 mm and 1 1/4"" x 1/4"" types.


  • Spring clamp terminals provide a faster method of terminating wires as compared to screw clamp systems
  • UL approved
  • Reliable in field applications
  • The spring clamp is opened with a small screwdriver inserted to the side of the clamp nest to the wire entry way
  • When the field wiring is in place, the screwdriver can be removed and a reliable, secure connection is maintained

Is our YBK series right for your application?  Check out all of American Electrical's terminal block options here to be sure.

Similar to Wago terminal blocks (tension clamp).

Specifications

Model:
YBK I
Type:
Fuse and Disconnect Terminals
Width mm :
8 mm
Color:
Beige
Voltage V:
500 ~ V
Cross-Section mm² :
4 mm²
UL/CSA Voltage V:
600 ~ V
UL/CSA Cross-Section AWG:
22 - 10 AWG
Fuse Size in [Imperial]:
1 1/4 x 1/4 in
Insulation Stripping Length mm :
12 mm
Solid Strand, Screw Connection mm² :
.5 to 4 mm²
Fine Strand, Screw Connection mm² :
.5 to 4 mm²
AWG Conductor:
22 - 10

Downloads


Certifications